NOVAVIT F 400 REGAL AP

Novavit F 400 Regal AP is a duct-fresh ink with very good all - round properties. The four main characteristics- gloss, absorption/drying (stacking) time, freshness and rub resistance are compared with each other. This forms a well balanced series.
The stay fresh character means that the F 400 remains in the ink duct overight and, during this time, no skin will happen.

Novavit F 400 Regal AP's fast setting and drying have many advantages for the printer. This includes good stack performance, which permits rapid further processing and the opportunity to use problematic substrates without any significant build up on lint or residue on the blanket.

The novavit process inks F 400 dry extremely fast for a duct- fresh series.

 

NOVAKEY

Novakey is an all- round offset sheet fed process set. This series was carefully formulated with a well balanced selection of resins and colorants to produce inks with high colour intensity, maximum transparency to get beast four colour effect fast drying property, high gloss and excellent rub and scratch resistance.

• Excellent press stability
• Good trapping
• High concentration
• Fast drying
• Very good rub resistance
• High gloss.

 

NOVAKROM

Novakrom is an offset sheet fed process set specially developed for all type of uncoated (Paper and board) This series was carefully formulated to produce inks with colour density, good rub resistance and to give good print on uncoated stocks.

• Excellent press stability
• Good trapping
• High concentration
• Fast drying

 

NOVAFINE

Novafine is an all- round offset sheetfed process set. This series was carefully formulated with a wll balance selection of resins and colorants to produce inks with high colour intensity, easier ink water balance fast drying property high gloss and excellent rub and resistance.

• Excellent press stability
• Easier ink/water balance
• Good trapping
• High color intensity
• Fast drying, requires very little spray powder
• Very good rub resistance

 

AQUA GLOSS COATING G9/425

Used for glossy, scratch and scuff resistant coatings on printed board with a good ant sealing effect against cellophane MS+XS as well as PVC and other wrapping in films except acrylic coated ones, provided that board and printing ink are suitable.

 

AQUA BLISTER LACQUER G9/121

Heat sealing water based coating, specially used for blister cards with pvc blislers, also for heat laminating paper to board.
Test on suitability should be effect in advance
Only use inks resistant to ammonia and alcohol.