NovaDom Standard

NovaDom is a desktop platemaking system for on-demand printing on small offset presses. A 100 micron, dimensionally stable polyester film. NovaDom is also available as a single-sided plate. Prints up to 20,000 copies per side, that is 40,000 copies per plate without banking.

NovaDom 5000

The NovaDom 5000 Polyester Laser Plate which is approved by Hewlett Packard, provides a zero defect performance when used with the HP LaserJet 5000 Laser Printer/Platemaker.

NovaDom 5000 has been especially developed to be corrosion free and has been meticulously tested by Hewlett Packard and approved for this unique and indispensible feature.

NovaDom 5000 can be imaged on a single side. It has got a matte coating on the reverse to give excellent feeding and imaging properties through the laser printer.

Presto Instant Print Plate

Presto is the new best-value polyester plate to accomplish the best print quality at the lowest cost. Presto is a 75 micron polyester based plate imageable on a laser printer and/or a plain paper copier. Presto is imageable on both sides and prints 2000 impressions each side.

The Polyster Plates are Avaliabe in various sizes to meet the requirement of different printing areas

Novadom Range of Chemistry for Printing from Novadom Range of Products

(Optional with NovaDom Computer-to-Plate-to-Print System)

NovaDom Chemicals are safe, fast & economical and are highly recommended for use with the NovaDom Desktop Laser Plate.

NovaDom Super Plate Cleaner

NovaDom Super Plate Cleaner is essentially used to remove background tint caused by toner scatter from the laser printer. It prevents background toning or tinting (unwanted ink deposit in non-printing areas), enhances the ink receptivity of the image areas and removes finger-prints.

NovaDom Delete

NovaDom Delete removes background specks and unwanted image areas, if any, with NovaDom deletion fluid or pen.

NovaDom Fount Solution

NovaDom Fount Concentrate is a premium fountain solution that is specially formulated for the NovaDom Desktop Laser Plate.

NovaDom Blanket-cum-Roller Wash

NovaDom Blanket-cum-Roller Wash is specially formulated from high quality solvents, to give maximum effectiveness and safety to blankets and rollers. It is used to remove excessive fluff from the blanket as well as ink & paper fibres from the rollers. It helps prevent glazing of ink forme rollers by doing away with unwanted solvents and surfactants.

Procedure of Using Novadom Plates for Printing

OTHER PRODUCTS

Laser Media

TechNova is a global leader in laser printer films & plates for desktop computer-to-film and computer-to-plate systems. TechNova offers the most comprehensive range of non-silver films for direct imaging on digital printers using laser, inkjet and xerographic technologies.

NovaSharp Laser Printer Film

NovaSharp is a polyester-based daylight-working, zero-process, dry-to-dry film for making plate-ready offset positives (or negatives) using a desktop computer and a laser printer. The UV density of the image is comparable with silver-sensitised graphic arts films, and therefore perfectly suited for exposing presensitised positive and negative offset plates.

NovaSharp is available in three grades : Crystal, Pearl, Topaz.

NovaSharp Crystal

State-of-the-art fully transparent, smooth surface film. Plate exposure time & dot reproduction values are similar to silver-based film. Positives made from NovaSharp Crystal can be used in combination with silver-based positives on a montage.

NovaSharp Pearl

Semi transparent, white film with matte finish (on one or both sides). Designed for universal applications, and ideally suited for reproduction of large solids.

NovaSharp Topaz

Semi transparent, off-white film with matte finish (on one or both sides). Performance features are the same as NovaSharp Pearl, but the film base is off-white instead of pure white. The most economic version of NovaSharp.